Product range

Non-Slip, Waterproof PVC Roofing Walkway & Membrane Protection with Safety Marks


RENOLIT ALKORPLAN Walkway is a laminated and flexible waterproof PVC based walkway used for maintenance, access and emergency routes across the roof area.
RENOLIT ALKORPLAN Walkway features bright yellow markings which make it ideal for roof access. As an unreinforced membrane, the waterproof walkway also doubles as a protection layer for the underlying membrane.
RENOLIT ALKORPLAN Walkway is safe to fit thanks a hot air weld joining process. NO NAKED FLAME during installation.

Read more
products benefits:

Clear indication of the walkways on a roof utilizing a yellow safety marking on the edges

Waterproof and doubles as a protection layer for the underlaying roofing membrane

NO NAKED FLAME during installation due to innovative hot air joining techniques

Non-slip embossing tested according to British and German standards for safe roof access

Tech info:

  • Type of film

    Laminated membrane of flexible PVC with woven polyester reinforcing

  • Material


  • Thickness

    1.2 mm

  • Width

    1.05 m

  • Weight

    1.53 kg/m2

  • Roll length

    25 ml

  • Roll weight

    ca. 40 kg

  • Tear strength


  • Full Information:

    Check out the full
    datasheet available in
    the Downloads section!

More Info

Walkway membrane for delineating maintenance, access and emergency routes. The Renolit Alkorplan walkway can be used as a waterproofing membrane in its own right.

• Before the walkway membrane is installed, the roof deck has to be free of irregularities, water, frost,
ice and sharp and rough materials such as screws, metal off-cuts, etc.
• Unroll the walkway membrane and cut the membrane to the desired length. Be aware that only maximum lengths of 3 m are allowed. In case of larger lengths, a joint of minimum 2 cm must be provided for better rainwater drainage.
• Install the walkway membrane with a continuous weld around the perimeter (min 3 cm weld).