Resitrix SK W is a synthetic rubber (EPDM) waterproofing membrane, heat weldable and glass-reinforced. Its fully self-adhesive system provides an easier and simpler installation on a variant of applications that include, either fully exposed, for fully bonded systems or beneath roof gardens (intensive, extensive or biodiverse greenery) and green roof systems of any kind. Resitrix SK W does not require any additional surface protection and is resistant to ozone, UV radiation and infrared radiation throughout its lifetime.
Read moreCertified service life of more than 50 years
NO need of naked flames for installation
Permanently resistant to ozone, UV radiation and infrared radiation
Environmentally friendly and recyclable
Tech info:
Thickness
2,5 mm ± 10%
Weight per unit area
approx. 2,75 kg/m²
Length
10 m
Width
1000 mm
Shelf life
12 months in originally packed state
Tensile strength
Longitudinal: 361 N/50 mm Transverse: 333 N/50 mm
Elongation at break
Longitudinal: 600% Transverse: 600%
Water vapour diffusion resistance index
approx. 58.000 μ
Dimensional stability after 6 hours at 80°C
Longitudinal: + 0,1 % Transverse: + 0,2 %
Reaction to fire
Class E
Full Information:
Check out the full
datasheet available in
the Downloads section!
Downloads:
The following Installation variants are possible:
• Self-adhesion on full-surface primer
• Self-adhesion without primer (on exposed or fresh bitumen substrate only)
• Laying without primer with additional mechanical fixation, including installation tack welding